Avatar

lemoene

lemoene

About

Username
lemoene
Joined
Visits
262
Last Active
Roles
Member, Administrator, Moderator

Comments

  • Water quality laboratory, Test It, sponsors fixing some of these on the single sample COA. A relief - never since Bika LIMS' first audit in 2004 did it not satisfy ISO 17025 accreditation requirements Thorough audit trails, role based authorisation…
  • Rabbit hole?-) You could probably set up a hidden AS that uses strftime only, then use its keyword in further calculations. Is the objective to report certain Analyses' duration? But not all?
  • Hi Francois, the link to the document fails, please re-post. Appreciated
  • 500 Sample batch experiment under way, preview, Bika Covid at Full Tilt Imnsho, any LIMS worth its salt should perform very well under such light loads, no big deal - maybe this run will convince doubters that Open Source LIMS does it with the very…
  • Just remembered more complex results interpretation, colony diameter interpretation https://www.bikalims.org/manual/senaite-health/antibiotic-susceptibility-testing-AST [DIAMETER] <= [LOWER_LIMIT] and "{0:0.0f} mm - Resistant ( Resistant: &…
    in Calculations Comment by lemoene May 2020
  • It works, here from a standard COA (with the usual minor irritations - would prefer Positive or Detected instead of 1, brighter OOR alert icons, ...) ----------------------------8<------------------------------------------------- (Image) ----…
  • Cool. We must take these up in the standard setup data sheets... Please x-check whether I have Ryznar's correct RSI = 2 * ((9.3 + ((log10(TDS)-1) / 10) + ((-13.12 * log10(Temp +273)) + 34.55)) - ((log10(CaH) - 0.4) + (log10(MAlk)))) - pHa or in Bik…
  • Followed up at LIMS Covid configuration. How?
  • Not in an automated way Francois. When you capture the calibration for the Instrument every morning, set the certificate to expire the same day, e.g. Start and End date today's date. Calibration Certificates Never tried it myself... The LIMS takes…
  • Thanks for posting Francois Thus far we got to do most calculation formulas with standard mathematical operators, but had to make sure about Langelier’s that we encountered earlier and actually brag about in the manual We did use log10 and exp fun…
  • Improvements * Compulsory fields indicated * Invalid entries clearly indicated yellow to pick them up easier * Improved column headers * etc. (Image)
  • Hi Francois, the particular COA we work on now requires the Analysis Methods to be sub contracted, and not Analysis Services. Does that cover your use case too? It will resolve the issue where the same method is used in-house as well as by sub-cont…
  • Updated in new doc Edited with more detail and NB, users also have to sign when data are created, e.g. registering Samples, or creating new setup objects
  • Open Source LIMS prices then? Even more difficult to ascertain, as it depends completely on the services the lab requires, and number of users to be trained and assisted, their skills levels, capacity and zeal for learning. Even better If the lab h…
  • Re assembled, thanks @Mike! Complete the CSV In this example I used only one profile LactoscopeAll, for all the dairy tests destined for the Lactoscope. It was configured via the UI in the system earlier (Image) Load From the Client's Imports …
  • More gaps are plugged in the 2017 ISO 17025 single sample COA in design (updated), some rather deep going: * Field Analyses are back, and integrated into Analysis Location * Subcontractors Lite - simple first steps towards full Subcontracting funct…